Cisco C9136I White Power over Ethernet

Cisco C9136I White Power over Ethernet

Brand: Cisco

Part # C9136I-E

Condition: New

Availability: In Stock

Category Brand:

Item

Specification

Part numbers

Cisco Catalyst 9136I Access Point: Indoor environments, with internal antennas

●  C9136I-x: Cisco Catalyst 9136 Series

Regulatory domains: (x = regulatory domain)

Customers are responsible for verifying approval for use in their individual countries. To verify approval and to identify the regulatory domain that corresponds to a particular country, visit https://www.cisco.com/go/aironet/compliance.

Not all regulatory domains have been approved. As they are approved, the part numbers will be available on the Global Price List and/or regional price lists.

Cisco Wireless LAN Services

●  For details on optional WLAN Services, visit Services for Wireless and Mobility

Software

Catalyst 9136I

●  Cisco IOS XE Software Release 17.7.1 or later

Supported wireless LAN controllers
●  Cisco Catalyst 9800 Series Wireless Controllers (physical or virtual)
●  Cisco Catalyst 9k switches with Embedded Wireless Controller in SDA mode

802.11n version 2.0 (and related) capabilities
●  4×4 MIMO with four spatial streams
●  Maximal Ratio Combining (MRC)
●  802.11n and 802.11a/g beamforming
●  20- and 40-MHz channels
●  PHY data rates up to 1.5 Gbps (40 MHz with 5-GHz and 20 MHz with 2.4-GHz)
●  Packet aggregation: Aggregate MAC Protocol Data Unit (A-MPDU) (transmit and receive), Aggregate MAC Service Data Unit (A-MSDU) (transmit and receive)
●  802.11 Dynamic Frequency Selection (DFS)
●  Cyclic Shift Diversity (CSD) support

802.11ac
●  8×8 downlink MU-MIMO with eight spatial streams
●  MRC
●  802.11ac beamforming
●  20-, 40-, 80-, and 160-MHz channels
●  PHY data rates up to 3.4 Gbps (8×8 80 MHz or dual 4×4 80+80 MHz on 5-GHz)
●  Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive)
●  802.11 DFS
●  Cyclic Shift Diversity (CSD) support
●  Wi-Fi Protected Access (WPA) 3 support

802.11ax
●  8×8 uplink/downlink MU-MIMO with eight spatial streams (5-GHz)
●  4×4 uplink/downlink MU-MIMO with four spatial streams (2.4 and 6-GHz)
●  Uplink/downlink OFDMA
●  TWT
●  BSS coloring
●  MRC
●  802.11ax beamforming
●  20-, 40-, 80-, and 160-MHz channels (6-GHz)
●  20-, 40-, 80-, 80+80-MHz (5-GHz)
●  20-MHz channels (2.4-GHz)
●  PHY data rates up to 10.2 Gbps (4×4 160 MHz on 6 GHz, 8×8 80 MHz on 5-GHz, and 4×4 20 MHz on 2.4-GHz)
●  Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive)
●  802.11 DFS
●  CSD support
●  WPA3 support

Integrated antenna
●  2.4-GHz: Peak gain 4 dBi, internal antenna, omnidirectional in azimuth
●  5-GHz: Peak gain 5 dBi, internal antenna, omnidirectional in azimuth
●  6-GHz: Peak gain 6 dBi, internal antenna, omnidirectional in azimuth

Interfaces
●  2x 100M/1000M/2.5G/5G Multigigabit Ethernet (RJ-45)
●  Management console port (RJ-45)
●  USB 2.0 at 9W

Indicators
●  Status LED indicates boot loader status, association status, operating status, boot loader warnings, and boot loader errors

Dimensions
(W x L x H)
●  Access point (without mounting brackets):

◦      9.9 x 9.9 x 2.2 in. (25.1 x 25.1 x 5.6 cm)

Weight

Catalyst 9136I

●  3.6 lb. (1.65 kg)

Input power requirements
●  802.3bt Cisco Universal PoE (Cisco UPOE), 802.3at Power over Ethernet Plus (PoE+)
●  Cisco power injector, AIR-PWRINJ7=
●  802.3af PoE (only for configuration staging, all radios off)

Related products