Menu
Part # AIR-AP2802I-E-K9
Availability: In Stock
Condition: New
|
Software |
● Cisco Unified Wireless Network Software Release 8.2.111.0 or later
● Cisco IOS ® XE Software Release 16.3
|
||||||
|
Supported wireless LAN controllers |
● Cisco 2500 Series Wireless Controllers, Cisco 3500 Series Wireless Controllers, Cisco Wireless Controller Module for ISR G2, Cisco Wireless Services Module 2 (WiSM2) for Catalyst ® 6500 Series Switches, Cisco 5500 Series Wireless Controllers, Cisco Flex ® 7500 Series Wireless Controllers, Cisco 8500 Series Wireless Controllers, Cisco 9800 Series Wireless Controllers, Cisco Virtual Wireless Controller
● Cisco Catalyst 3850 Series Switches, Cisco Catalyst 3650 Series Switches
● Cisco Mobility Express
|
||||||
|
802.11n version 2.0 (and related) capabilities |
● 4×4 MIMO with three spatial streams
● Maximal Ratio Combining (MRC)
● 802.11n and 802.11a/g beamforming
● 20- and 40-MHz channels
● PHY data rates up to 450 Mbps (40 MHz with 5 GHz)
● Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx)
● 802.11 Dynamic Frequency Selection (DFS)
● Cyclic Shift Diversity (CSD) support
|
||||||
|
802.11ac Wave 1 capabilities |
● 4×4 MIMO with three spatial streams
● MRC
● 802.11ac beamforming
● 20-, 40-, and 80-MHz channels
● PHY data rates up to 1.3 Gbps (80 MHz in 5 GHz)
● Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx)
● 802.11 DFS
● CSD support
|
||||||
|
802.11ac Wave 2 capabilities |
● 4×4 MU-MIMO with three spatial streams
● MRC
● 802.11ac beamforming
● 20-, 40-, 80, 160-MHz channels
● PHY data rates up to 4680 Mbps
● Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx)
● 802.11 DFS
● CSD support
|
||||||
|
Integrated antenna |
Flexible radio (either 2.4 GHz or 5 GHz) ● 2.4 GHz, gain 4 dBi, internal antenna, omnidirectional in azimuth
● 5 GHz, gain 6 dBi, internal directional antenna, elevation plane beamwidth 90°
Dedicated 5-GHz radio ● 5 GHz, gain 5 dBi, internal antenna, omnidirectional in azimuth
|
||||||
|
External antenna (sold separately) |
● 2802e Series access points are certified for use with antenna gains up to 6 dBi (2.4 GHz and 5 GHz)
● Cisco offers the industry’s broadest selection of antennas, delivering optimal coverage for a variety of deployment scenarios
|
||||||
|
Smart antenna connector |
● Available on the 2802e Series access points only
● Requires the AIR-CAB002-DART-R= 2 ft smart antenna connector to RP-TNC connectors to connect a second antenna to the access point
● Required when running the flexible radio as either a second 5-GHz serving radio or Wireless Security Monitoring radio
|
||||||
|
Interfaces |
● 2802I/E
◦ 2x 100/1000BASE-T autosensing (RJ-45) ● Management console port (RJ-45)
● USB 2.0 (enabled via future software)
|
||||||
|
Indicators |
● Status LED indicates boot loader status, association status, operating status, boot loader warnings, boot loader errors
|
||||||
|
Dimensions (W x L x H) |
● Access point (without mounting brackets): 2802I: 8.66” x 8.68” x 2.17”, 2802E: 8.66” x 8.77” x 2.50”
|
||||||
|
Weight |
Cisco Aironet 2802i ● 3.53 lb (1.6 kg)
Cisco Aironet 2802e ● 4.6 lb (2.09 kg)
|
||||||
|
Input power requirements |
● 802.3at PoE+, Cisco Universal PoE (Cisco UPOE ®)
● 802.3at power injector (AIR-PWRINJ6=)
|
||||||
|
Power draw |
● 22.5W at the PSE (20W at the PD) with all features enabled except for the USB 2.0 port
● 26.5W at the PSE (23W at the PD) with the USB 2.0 port enabled
|
||||||
