Menu
Brand: Cisco
Part # C9117AXI-EWC-E
Condition: New
Availability: In Stock
|
Item |
Specification |
|||||||||
|
Part numbers |
Cisco Catalyst 9117AXI Access Point: Indoor environments, with internal antennas ● C9117AXI-x: Cisco Catalyst 9117
Cisco Catalyst 9117AXI Access Point: Indoor environments, with internal antennas, with embedded wireless controller ● C9117AXI-EWC-x: Cisco Catalyst 9117
Regulatory domains: (x = regulatory domain) Customers are responsible for verifying approval for use in their individual countries. To verify approval and to identify the regulatory domain that corresponds to a particular country, visit https://www.cisco.com/go/aironet/compliance. Not all regulatory domains have been approved. As they are approved, the part numbers will be available on the Global Price List. Cisco Wireless LAN Services ● AS-WLAN-CNSLT: Cisco Wireless LAN Network Planning and Design Service
● AS-WLAN-CNSLT: Cisco Wireless LAN 802.11n Migration Service
● AS-WLAN-CNSLT: Cisco Wireless LAN Performance and Security Assessment Service
|
|||||||||
|
Software |
● Cisco Unified Wireless Network Software Release 8.9 or later
● Cisco IOS XE Software Release 16.11 or later
|
|||||||||
|
Supported wireless LAN controllers |
● Cisco Catalyst 9800 Series Wireless Controllers
● Cisco 3500, 5520, and 8540 Series Wireless Controllers, and Cisco Virtual Wireless Controller
|
|||||||||
|
802.11n version 2.0 (and related) capabilities |
● 8×8 MIMO with four spatial streams for 5-GHz band
● 4×4 MIMO with four spatial streams for 2.4-GHz band
● Maximal Ratio Combining (MRC)
● 20- and 40-MHz channels
● PHY data rates up to 600 Mbps (40 MHz with 5 GHz)
● Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive)
● Cyclic Shift Diversity (CSD) support
|
|||||||||
|
802.11ac |
● 8×8 downlink MU-MIMO with eight spatial streams
● MRC
● 802.11ac beamforming
● 20-, 40-, 80, and 160-MHz channels
● PHY data rates up to 3.5 Gbps at 5 GHz
● Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive)
● CSD support
● 160 MHz support only on 4-spatial stream
|
|||||||||
|
802.11ax |
● 8×8 MIMO with eight spatial streams for 5-GHz band
● 4×4 MIMO with four spatial streams for 2.4-GHz band
● Downlink OFDMA
● TWT
● MRC
● 802.11ax beamforming
● 20-, 40-, 80, and 160-MHz channels
● PHY data rates up to 5 Gbps at 5 GHz
● Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive)
● CSD support
|
|||||||||
|
Integrated antenna |
● 2.4 GHz, peak gain 4 dBi, internal antenna, omnidirectional in azimuth
● 5 GHz, peak gain 6 dBi, internal antenna, omnidirectional in azimuth
|
|||||||||
|
Interfaces |
● 1x 100, 1000, 2500, 5000 Multigigabit Ethernet (RJ-45) – IEEE 802.3bz
● Management console port (RJ-45)
● USB 2.0 with up to 4.5W (enabled via future software)
|
|||||||||
|
Indicators |
● Status LED indicates boot loader status, association status, operating status, boot loader warnings, and boot loader errors
|
|||||||||
|
Dimensions (W x L x H) |
● Access point (without mounting bracket and mounting features): 8.70 x 8.70 x 1.94 in. (22 x 22 x 4.93 cm)
● Access point (without mounting bracket): 8.70 x 8.70 x 2.19 in. (22 x 22 x 5.56 cm)
|
|||||||||
|
Weight |
● 3.02 lb (1.4 kg)
|
|||||||||
|
Input power requirements |
● 802.3at Power over Ethernet Plus (PoE+), 802.3bt Cisco Universal PoE (Cisco UPOE+, Cisco UPOE)
● Cisco power injector, AIR-PWRINJ6=
● 802.3af PoE
● Cisco power injector, AIR-PWRINJ5= (Note: This injector supports only 802.3af)
Note: When 802.3af PoE is the source of power, both 2.4-GHz and 5-GHz radios will be reduced to 2×2 and Ethernet downgraded to 2.5 Gbps; in addition, the USB port will be off. |
|||||||||
